T-14 MZ + R6014 FS 2.4 G M2 Futaba Robbe F8067 1-F8067
T14MZ, the luxury-class hand-held transmitter, featuring a huge 151 x 57 mm (six inch) backlit full-colour touch-screen monitor and menu control system based on Windows CE(tm), now also with FASST 2.4 GHz technology. The FASST system is a Spread Spectrum system with frequency hopping (FHSS), and is therefore permitted to transmit a maximum power of 100 mW EIRP. This gives it adequate reserves even for large-scale model aircraft and jets. Mode 2, throttle left.
No crystals, no spot frequency selection, maximum security from same-channel interference.
Virtually interference-free due to Spread Spectrum modulation, frequency hopping and encoding from transmitter to receiver using more than 130 million codes.
Please see the FASST introduction page for a detailed description of the advantages of 2.4 GHz FASST technology.
This is a variant of the familiar T14MZ system, supplied complete with the TM 14 FASST RF module and R6014FS 14-channel FASST receiver.
The system is very straightforward to program in conjunction with the touch-screen control buttons, or the 3-D hotkey and the graphically based Windows(tm) user interface.
Comprehensive software provides all the essential facilities even for power models, gliders and helicopters with extensive functions. Plenty of freely programmable mixers are available with up to 17-point curves for setting up very complex mixer functions. Includes logical switched function for switches and sticks.
Special precision-made dual-axis stick units with quadruple ballraces and long-life industrial-standard potentiometers. Experience the special feeling of control for yourself.
The FASST system provides 14 channels with a resolution of 2048 steps, and thereby fulfils the wish of many modellers for more channels. The large bandwidth available on the 2.4 GHz band makes it possible to provide many high-resolution channels and fast signal repeat rates (16.5 ms). The latency - the interval between operating the transmitter control and the servo starting to move - is reduced even further. Virtually real-time control.
The latest BGA (Ball Grid Array) layout technology enabled us to reduce the size of the matching R 6014 FS FASST receiver (with aerial diversity system) to just 56.8 x 42.4 x 21 mm, and a weight of only around 21 g.
|
| Optional |
Excerpt from the function list:
General
Model select, thirty internal model memories, can be expanded to about 240 models per 32 MB memory on a CF card; CF cards up to 1000 MB can be used. Model name and user name with 32 characters.
Operating hours timer, timer and calendar function, two stopwatches, model memory-specific, with 100 lap time / motor run time memory.
Unrestricted transmitter control assignment, channels 1 ... 12, mode select throttle left / right.
Twelve proportional channels, two switched channels, two proportional channels; can be expanded to eight multi-channels per channel using Multi-Prop decoders.
Function reverse on all channels, also hardware transmitter control reverse.
Trainer mode with individual function transfer and mix mode operation.
Selection of monitor colour, also adjustment of contrast and strength of backlighting.
Digital stick trims, optionally with normal, centre or ATL (asymmetrical) trim function. Optional "global" mode (all flight modes) or "separate" mode (effective only in the specified flight mode).
Freely selectable trim control for each transmitter control (switch / slider), including rotary trimmers, digital buttons, analogue rotary controls and linear sliders.
Servo travel adjustment with limit function (ATV) for the twelve proportional channels.
Four stick functions, eight switches, six linear rotary controls, six trim buttons, one digital rotary control, freely selectable as transmitter controls.
Freely selectable transmitter controls and sequence for the twelve proportional channels and four virtual channels. Up to six switchable Dual Rate settings per function.
Alternatively with pre-programmed transmitter control settings from linear via exponential to 9-point (17-point) curve.
With separately variable speed adjustment and delay for "out" and "back". Optional "global" or "separate" modes.
Eight flight modes per model memory, with user-defined priority; any name can be assigned.
Ten freely programmable mixers per model memory. With pre-programmed transmitter control settings which can be called up, from linear to nine-point curve; can be expanded to 17-point curves.
Optionally with / without trim. "Stick to stick" or "stick to servo" mix modes. With separate delay and speed settings for switching the mixing on and off. The mixers can be connected in series (cascading); switches, transmitter control functions or virtual functions can be selected as transmitter controls.
With offset function and fine-tuning by external mixer input adjustment using rotary control, switch or stick. Optional "global" or "separate" mode.
Alternatively each programmable mixer can be switched from the curve mixer to an offset mode. This offset mixer enables you to mix a maximum of four offset values per programmable mixer into freely selectable functions, with separate adjustment of delay and speed for switching on and switching off.
Optional time-controlled offset function for a maximum of four functions, typically used for door sequencers.
Naturally this mixer function can also be activated for group mode (effective in all flight modes) or in single mode (effective only in the selected flight mode).
Language select: German or English
Power models (Acro)
Comprehensive mixer menus for a vast range of powered model aircraft, from models with one aileron servo to aeroplanes with up to eight wing-mounted servos.
In addition to the choice of wing type it is also possible to select the tail variant, i.e. normal, separate elevators with aileron function (ailvator) and V-tail.
Model deltas and powered flying wings with 2 ... 8 wing-mounted servos are also available.
These mixer menus are already pre-programmed to suit the model once called up, and contain all the required mixer functions.
Gliders (Glider)
Here again a comprehensive range of mixer menus is available to cater for a vast variety of model types, from aircraft with one aileron servo up to aeroplanes with a maximum of eight wing-mounted servos.
Optionally with or without power system.
In addition to the choice of wing type it is also possible to select the tail variant, i.e. normal, separate elevators with aileron function (ailvator) and V-tail.
Flying wings with 2 ... 10 wing-mounted servos are also available.
These mixer menus are already pre-programmed, and contain all the required mixer functions.
Helicopters
The helicopter mixer menus differ basically in the method of swashplate actuation. All the classic swashplate linkages, including H1, H2, HR3, HN3, H4, H4X plus the new H3 90° and H3 140° are included as standard.
Every imaginable mixer function is available in these menus.
One special feature is the new kind of variable pushrod travel compensation for the H3 and H4 types. This prevents the differential throws which are otherwise inevitable with large or asymmetrical travels, and which can cause damage to the swashplate servos in the long-term. The speed of the pitch-axis (elevator) function can also be adjusted, in order to avoid the run-time differences with the HR3 / HN3 120° swashplate linkage. Optionally with fixed 45° (H4X) or infinitely variable virtual swashplate rotation.
Swashplate ring mixer for 3-D pilots, plus throttle limiter function.
| Specification: |
| Dimensions: 180 x 180 x 67 mm |
| Weight: 1230 g |
| Channel spacing: 2048 kHz |
| Spotfrequencies: 36.00 |
| Current drain: 450 mA |
| Power Supply: 7.4 V Lithium Ionen Akku |
| Transmission system: 8-12Kanal FM /10 Kanal PCM 1024 /14 Kanal PCM 2048 (G3) / FSK |
| Functions: 28/14 Servos |
|
|
| Kit contents: |
1 T14MZ transmitter, fully expanded to fourteen channels
1 TM14 FASST RF module, 2.4 GHz
1 Lithium transmitter battery, 7.4 V / 2200 mAh.
1 220 Volt automatic Lithium battery charger (1.5 A)
1 R6014FS FASST receiver
1 Aluminium transport case
1 DSC lead
1 DP card, 32 MB
1 Combination tool / writing stylus
1 Cleaning cloth
1 Switch harness with charge socket
2 Servo extension leads (20 cm)
|
|
|
| Accessories: |
| Lithium battery T-14 MZ 7,4V 2200 (1) 1-4553 | |  |
| Trainer cable FF-9 - FX 2.5mm (1) 1-8236 | | |
| Trainer cord FF-9 - F 3.5 (1) 1-8238 | | |
| Adapter cable flight simulator FF- (1) 1-8239 | | |
| Transmitter charge lead T-14 MZ (1) 1-8448 | | |
| Trainer cord FF-9 - Din 6 pin (1) 1-F1592 | | |
|
|
| Receiver included: |
|
|
|
|
|
For further information, please visit the homepage of this product.
|
This Product was added to our catalogue on Friday, 28. September 2007.
|
| We recommend following products: |
|
|
|
| This product is compatible too (for example): |
|
|
|
|
| Shopping Cart |
 |
|
|
|
| New Products |
|
|
|
|
Customer group:Gast
|
|
| Reviews |
|
|
|
|
|
|
|
Currently 110 Customers are online.
Letztes Update:
09.09.2010 10:31
|
|
Besucher seit Februar 2005
|
|
